Scale RC Engines

Trojan T-28 E-flite Carbon Z Upgraded Direct Fit Cockpit Kit (2.0m)

Name: Trojan T-28 E-flite Carbon Z Upgraded Direct Fit Cockpit Kit (2.0m)
Brand: Scale RC Engines
Price: 99.95 USD
Availability: InStock

$99.95 USD

Sale Sold out

Shipping calculated at checkout.

Include 2 WarbirdPilots.com Figures (As Shown) No Yes with Standard Head (2 Pilots) Yes with Moving Head and Random Motion Chip (2 Pilots) Yes with Moving Head No Random Motion Chip (2 Pilots)

Product variants

Quantity

This is a high detailed upgrade for the factory cockpit kit found in the E-flite Carbon Z T28.

No Painting Needed!

Comes in Full Color!

No Trimming or Cutting Needed!

Drop in Ready Cockpit Kit!

Just Glue and Go!

Foam Cockpit Pod/Canopy NOT Included

Designed to be one of the lowest effort installations on the market, simply open the organized bags and install the kit. Some minor assembly is required using nothing but medium ca glue. All the components come in full color and have been meticulously sized to fit in the airframe with no trimming or cutting needed.

Let your airframe stand apart from the rest with the hyper realistic details this kit provides such as; a scale seat and cushion, a gauge cluster with full color and period correct gauges, a set of period correct switch panels, trim tab controls and more.

The standard cockpit kit comes with provisions to outfit both the front and rear pilot sections, with the option for period correct pilots provided by warbirdpilots.com.

Pilots Shown are Optional and Not Included as Part of the Standard Kit

Please Contact Us for Special Pilot Configurations Not Listed

Motion Heads Come Standard with High Voltage Servos

Head Options will be Applied to Both Pilots if Ordered.

General Assembly Instructions

-Using an Exacto or other hobby blade, cut the bead of glue located under the canopy between the colored plastic at the bottom of your canopy and the foam. This will release your canopy from your cockpit.

-Use Medium CA to Glue Sub Assemblies Together (Our Parts)

-Follow the Pictures Here for Locations of Each Part

-Use Products Such as Goop/E6000/ 5min Epoxy to Glue Our Parts to the Airframe

-Glue Canopy Back onto the Foam.

-Pilots can be modified by simply cutting through the body with a sharp pair of scissors or hobby knife. The pilots are stuffed and have a soft metal wire internally (the pilots spine). It is recommended to remove the lower section of the flight suit before cutting and leaving some excess to fold under the pilots body once it has been cut. This extra flight suit material can be glued in place to hold the chest stuffing in. Once modifications have been complete, simple glue your pilots into the installed cockpit kit. Check for clearance height to your canopy prior to final installation.

-FOR SERVO HEAD PILOTS BE SURE NOT TO CUT THE SERVO WIRE LOCATED UNDER THE FLIGHT SUIT.

-Servo head pilots should be cut just under the servo body.

-Servo head pilots will require a hole to be drilled down through the cockpit kit and foam to run the power wire.